> For the complete documentation index, see [llms.txt](https://amobile-solutions.gitbook.io/yocto-developer-guide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://amobile-solutions.gitbook.io/yocto-developer-guide/getting-started/iot-800n-g420.md).

# IOT-800N-G420

The IOT-800N-G420 is an 8" rugged Android Panel PC built on the MediaTek Genio 420, aimed at connected vehicles, fleet management and edge AI in industrial vehicle applications. Alongside Android it runs Yocto, and this section covers the Yocto side.

{% hint style="info" %}
Please refer to the official product description from Amobile's official page.

* [IOT-800N-G420](https://www.amobile-solutions.com/product-detail8-15-76-0.htm)
  {% endhint %}

## What this section covers

| Page                                                                                                         | Contents                                |
| ------------------------------------------------------------------------------------------------------------ | --------------------------------------- |
| [Specification](/yocto-developer-guide/getting-started/iot-800n-g420/specification.md)                       | Hardware specification                  |
| [Build Environment Setup](/yocto-developer-guide/getting-started/iot-800n-g420/build-environment-setup.md)   | Host packages and prerequisites         |
| [Genio-tools Setup](/yocto-developer-guide/getting-started/iot-800n-g420/genio-tools-setup.md)               | Installing the flashing tools           |
| [Build from Source Code](/yocto-developer-guide/getting-started/iot-800n-g420/build-from-source-code.md)     | Unpacking the SDK and building an image |
| [Flash Image to Board](/yocto-developer-guide/getting-started/iot-800n-g420/flash-image-to-board.md)         | Download mode and flashing              |
| [Connecting Board to Host](/yocto-developer-guide/getting-started/iot-800n-g420/connecting-board-to-host.md) | Serial console, SSH and ADB             |
| [FAQ & Troubleshooting](/yocto-developer-guide/getting-started/iot-800n-g420/faq-and-troubleshooting.md)     | Known issues and their causes           |

## Software baseline

|               |                                           |
| ------------- | ----------------------------------------- |
| Yocto release | MediaTek IoT Yocto `rity-scarthgap-v26.0` |
| Yocto version | 5.0 Scarthgap                             |
| Kernel        | 6.6                                       |
| Machine       | `iot800n-g420`                            |
| Image         | `rity-demo-image`                         |
| Device tree   | `mt8391-iot800n-g420.dtb`                 |

{% hint style="info" %}
The device tree and platform files use the name `mt8391`. That is MediaTek's platform name for this family, which the Genio 420, 520 and 720 share, so the same SDK covers all three. The SoC fitted to this product is the MT8371LV.
{% endhint %}

{% hint style="warning" %}
This documentation describes carrier board revision **R02**. Earlier revisions differ in three places that affect software: the I2C0 pull-ups, the NFC power enable GPIO, and the speaker amplifier. See [FAQ & Troubleshooting](/yocto-developer-guide/getting-started/iot-800n-g420/faq-and-troubleshooting.md).
{% endhint %}